Deactivating The Alarm; Switching Off The Alarm; Sleep" Function; Light/Night Lamp - Beurer WL 50 Instrucciones De Uso

DAY
= Wake-up melody 1
(Melody with bird calls)
BELL
= Wake-up melody 2
(Chimes)
BEEP = Beep
FM
= Radio (most recently set radio station and
volume)
--- = No tone
5. Use the or
sunrise duration. Use the
5- 30
= 30-minute sunrise duration
5- 20
= 20-minute sunrise duration
5- 10
= 10-minute sunrise duration
5- 00 = No sunrise
The simulated sunrise starts before the set alarm in
order to prepare the body for waking up. During the
simulated sunrise, the mood light first switches from
red to yellow, and finally to white. The alarm sounds
at the actual wake-up time.
6. The alarm is activated. Either
the display (depending on the selected alarm mem-
ory space).
Activating the alarm
To activate the alarm, press the Alarm 1 or Alarm 2 button
on the wake up light. Either
(depending on the selected alarm memory space).
Note
The alarm cannot be set whilst the modes are being used
(Bluetooth , radio and AUX).
®

Deactivating the alarm

To deactivate the alarm, press the Alarm 1 or Alarm 2 but-
ton on the wake up light until either
on the selected alarm memory space) goes out.
Activating the snooze function
When the alarm sounds, touch the sensor surface (speak-
er surface on the top of the device) for 1 second to snooze
the alarm. When snooze function is activated, a light red
light appears. The snooze duration is 8 minutes. After 8
minutes the alarm will sound again.

Switching off the alarm

When the alarm sounds, touch the sensor surface (speak-
er surface on the top of the device) for 3 seconds, or
press the Alarm 1 or Alarm 2 button, to switch off the
alarm.
If you touch the sensor surface, the alarm will go off auto-
matically at the same time the following day. If you press
alarm Alarm 1 or Alarm 2 button, then the alarm won't
go off any more. To activate the alarm, press the Alarm 1
button to set the desired
button to confirm.
OK
or appears in
or appears in the display
or (depending
or Alarm 2 button on the wake up light. Make sure that
or is visible in the display. Only then will the alarm
sound on the following day at the set alarm time.

7.3 "Sleep" function

The "Sleep" function is ideal for helping you fall asleep. A
simulated sunset can be set here. With this function, the
light gradually dims after a set period of time. For added
relaxation, you can pair the simulated sunset with sounds
of the sea, the radio or your own music.
To switch on the "Sleep" function on the wake up light,
proceed as follows:
1. Select the desired musical accompaniment to falling
asleep with the Mode button. If you do not wish to have
any musical accompaniment, skip this step.
BLUE
= Music via Bluetooth
FM = Radio
SLP = Sleep melody (sounds of the sea)
button = sounds of the sea off
button = sounds of the sea on
Use the
AUX
= Music via an external audio source con-
nected to the AUX input
(e.g. MP3 player, smartphone or CD player)
2. Press the Sleep button.
3. The light will switch on and
Set the desired sunset duration (15, 30 or 60 minutes)
using the Sleep button. During the simulated sunset,
the mood light first switches from white to yellow, and
finally to red. The sleep function symbol
on the display.
4. The selected music is switched off automatically after
the set sunset has elapsed.
5. To cancel the sleep function early, press and hold the
Sleep button for 2 seconds. The sleep function symbol
disappears from the display.

7.4 Light/night lamp

The device features a night lamp with three brightness
levels.
• To switch on the night lamp, briefly tap the sensor sur-
face (speaker surface on the top of the device).
• To set the light's brightness level, tap the sensor sur-
face (speaker surface on the top of the device) again.
• To switch the night lamp off again, press the sensor
surface (speaker surface on the top of the device) for
longer (approx. 2 seconds).
13
®
button to confirm.
OK
15
will appear in the display.
appears