Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
1
GENERAL INFO
Specification
Functions
Intended Use
Other Info
LED Indication
Scope of
Supply
Warranty
* Viral load means the known family of coronaviruses (including SARS-CoV-2) and their strains.
** LED Indication for errors: flashing blue (capsule is missing), flashing red-blue (battery operation error).
INSTALLATION AND CONFIGURATION
1. Unpack the Cold Plasma Emitter and the accompanying accessories. Make sure that
the device is switched off (Power LED is off).
ATTENTION! If the device was stored in conditions other than operating and storage
conditions specified in the Installation and Operation Manual (scan the QR Code on the
back cover), please proceed to Step 2 in four (4) hours only!
Doc Date: 03/12/2021
©Perenio IoT spol s r.o.
All Rights Reserved
Input: DC 5 V / 2 A, 10 W max. Output: Emission of positive and
negative ions (including Mg
ionic solution in the CoV capsule. Battery: Built-in li-ion (2,600 mAh,
up to 6 hours of autonomous operation). IP30 Protection Class
Immediate ionization in an enclosed area of application of up to
2 meters around the device while it is switched on. Ionization of
closed spaces: up to 60 m
3
40,000 ion/cm
Prevention of diseases caused by known coronaviruses, by significant
reduction of the viral load* in the enclosed area of application of the
device
Operating conditions: 0 °C to +40 °C, up to 70% RH (non-condensing).
Storage conditions: 0 °C to +60 °C, up to 90% RH (non-condensing).
Dimensions: Ø 80 mm × 132.5 mm
Power LED is on or off: the device is switched off.
Power LED is blinking: device is switched on and operating**.
Battery charge level indication of the Power LED:
green (75–100%), yellow (30–74%), red (1–29%)
Cold Plasma Emitter with CoV Capsule, USB-C Power Adapter, Quick
Start Guide, Warranty Card, Sticker
2 years (service life: 2 years)
Version: 2.0.3
-
-
-
-
, K
, Zn
, Pt
, Au
3
in 30 minutes. Ions concentration: up to
2
-
) emitted from specific
1
Publicidad
Tabla de contenido
