Fm Radio - auna Silverstar Amp Manual Del Usuario

FM RADIO

FM radio mode receives analogue radio from the FM band and displays
RDS (Radio Data System) information about the station and show (where
broadcast). To enter FM Radio mode, either press mode and rotate the knob
to cycle through the listening modes until FM Radio is displayed, or select
Menu > Main menu > FM.
Manual search
To search manually, first short press the stations button and then turn the
OK knob right to scan upwards or turn the ok knob left to scan downwards.
Auto search
To initiate auto search, press and hold the ok knob. The radio starts to scan
the frequency band. It will stop automatically when a station has been
found.
If you want the radio to auto search downwards or upwards then you have
to do a manual search downwards or upwards prior to long pressing the ok
button.
The FM radio mode menu offers the following options:
• Scan Settings
• Audio Settings
• Main Menu
• Manual search
To search manually, first short press the stations button and then turn
the ok knob right to scan upwards or turn the ok knob left to scan
downwards.
• Auto search
To initiate auto search, press and hold the OK knob. The radio starts to
scan the frequency band. It will stop automatically when a station has
been found.
If you want the radio to auto search downwards or upwards then you
have to do a manual search downwards or upwards prior to long
pressing the OK button.
Selecting stations
To find a station, press OK. The frequency display starts to run up as radio
scans the FM band. Alternatively, you can scan up or down by pressing and
holding left or right buttons or tune manually with quick presses.
Note: Scanning can be set to search for strong signals only. Preset stations
can be stored and recalled as described in Presets.
EN
51