Optical; Coaxial; Alarms And Sleep - auna Silverstar Amp Manual Del Usuario

EN
56

OPTICAL

Optical mode plays audio from an external source such as an MP3 player.
To play audio with Optical mode.
• To avoid sudden loud volume, turn the volume low on both radio and, if
adjustable, the audio source device.
• Connect the external audio source to the Optical connector
• To enter Optical mode, either press mode and rotate the knob to cycle
through the listening modes until Optical is displayed, or select Menu >
Main menu > Optical.
• Adjust the volume of radio (and, if necessary, the audio source device)
as required.

COAXIAL

Coaxial mode plays audio from an external source such as an MP3 player.
To play audio with Coaxial mode,
To avoid sudden loud volume, turn the volume low on both radio and, if
adjustable, the audio source device.
Connect the external audio source to the Coaxial connector
To enter Coaxial mode, either press mode and rotate the knob to cycle
through the listening modes until Coaxial is displayed, or select Menu >
Main menu > Coaxial.
Adjust the volume of radio (and, if necessary, the audio source device) as
required.

ALARMS AND SLEEP

As well as clock/calendar, there are two versatile wake-up alarms with
snooze facility, and a sleep function to turn the system off after a set period.
Each alarm can be set to start in a particular mode.
Sleep
To set the sleep timer, press the Sleep key on remote control repeatedly to
cycle through the sleep time options: Sleep OFF, 15 Mins, 30 Mins, 45 Mins ,
60 Mins, 90Mins or 120Mins. Stop when the required time is displayed, after
a brief moment the screen returns to the screen being used before the sleep
function was selected. On the now playing screens the remaining sleep