Publicidad
Idiomas disponibles
Idiomas disponibles
Technical Data
Supply voltage: 220 – 240V / 50Hz
Power: 100 Watt
GENERAL
Soldering is a process for joining metals by the application of molten materials. Nearly all metals and
metal alloys can be soldered; mainly, brass, copper, iron, etc. One distinguishes between hard
soldering and soft soldering.
By hard soldering one intends soldering at temperatures over 450℃.The soldering alloys (for hard
soldering and brazing and silver soldering) are made of metal alloys which are first melted at
temperatures which cannot be achieved with a soldering iron. Soft soldering is a process carried out
at temperatures below 400℃.
With this soldering gun, you make soft soldering.
Safety Advice
•
The soldering gun and its packaging are not toys. For this reason, keep the soldering gun and
its packaging away from children!
•
Before connecting the tool to a power supply, make sure that the supply voltage corresponds to
the ratings-230V-indicated on the tool nameplate.
•
Always unplug the tool from power outlet after use!
•
Let the soldering gun cool down at ambient temperature before storing it. Do not leave the tool
unguarded while cooling down.
•
Do not use the soldering gun if its casing, power cord or plug are damaged. Send faulty
soldering guns for repair to a qualified repair location. Never open the tool.
•
Activate your soldering gun for 12 seconds max, then let it cool down for 48 seconds (rest).
Uncompliance with such standards invalidates the warranty because of operation under
overheating conditions.
SW-Stahl und Werkzeugvertriebs GmbH
5
d i e
Soldering Gun | 100 W
6
e
s
s
a r t S
h
c
s
m
e
R
Tel. +49 (0) 2191 / 46438-0
r e
F
ax +49 (0) 2191 / 46438-40
s
u
k r e
v
e
7
9
8
2
4 -
D
e
BGS 9920
L
d . l h
a t s
w
s
@
o f n i
: l i
Publicidad
