Brew Group - Saeco Vienna plus Sup 018M Instrucciones De Uso

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

All manuals and user guides at all-guides.com
14
• For a thorough cleaning, remove the pannarello
from the steam spout.
Loosen the ring nut and remove the internal part
of the pannarello. After washing it thoroughly, reas-
semble it taking care to position it as shown in the
fi gure.
(Fig. 25) - Clean the water tank on a daily basis.
- Remove the fi lter in the water tank and wash it
under drinking running water.
- Reinsert the fi lter into its seat by gently pressing
and turning it.
- Fill the tank with fresh drinking water.
• use a soft cloth moistened with water to clean the
appliance.
• Do not dry the machine and/or its components using
a microwave and/or conventional oven.
• (Fig.35) - Remove the dispensing spout by pulling
it outwards and wash it with lukewarm water. After
washing it, fi t it back in its seat by pushing it to its
limit stop.
• (Fig.31-34) - Clean the dispensing outlet.
We recommend emptying and cleaning (on a daily
basis):
- the grounds drawer (8)
- the drip tray (10)
CLEANING AND MAINTENANCE - DESCALING
10.1

Brew Group

• The Brew Group (15) must be cleaned every time
the coffee bean hopper is fi lled or at least once a
week.
• Turn off the machine by pressing the main power
button (5) to -0- and remove the plug from the
socket.
• (Fig.31-34) - Open the service door (13) and remo-
ve the coffee grounds drawer (8), and then remove
the drip tray (12) as well.
• (Fig. 34) - Remove the Brew Group (15) by the
handle and press the «PRESS» key. The Brew
Group must be cleaned only with warm water and
no detergents.
• (Fig. 35) - Wash the Brew Group with lukewarm
water and carefully clean the upper fi lter.
• Thoroughly wash and dry all the parts of the Brew
Group.
• Thoroughly clean the dispensing outlet.
• Reinsert the Brew Group in the dispensing outlet
clicking it into place without pressing the "PRESS"
key.
• Close the door, insert the grounds drawer and the
drip tray.
11
DeSCALING
Limescale normally forms with the use of the appli-
ance. Descaling is necessary every 1 - 2 months or if
you notice a reduction in water fl ow.
Please use Saeco
descaling solution in
your machine. It has been
specifically developed to
preserve performance and
functionality throughout
the lifetime of the machine
and to ensure, with regular
use, a high quality delivered
product.
Warning! Never drink the descaling solution
and any substances dispensed until the

Publicidad

Tabla de contenido
loading

Tabla de contenido