Troubleshooting - Oreck DualMax Guia Del Usuario

Trouble-
Service problems that appear to be major can often be solved
easily. You can be your own troubleshooter by reviewing this guide.
shooting
All other servicing should be done by an Oreck authorized
service center.
Problem
Unit does not • Power Cord
turn ON
• Selector Switch
• Cover
• ALCI Plug
Truman Cell Truman Cell
®
light has turned
solid amber.
Truman Cell Truman Cell
®
light is blinking
amber.
Unit does Truman Cell
not remove
particles.
Unit sparks, Truman Cell
crackles and
pops.
Unit still does Review all the
not operate above.
properly.
All manuals and user guides at all-guides.com
Check
• Plug in Power Cord
• Set Selector Switch for desired fan speed.
• Make sure the cover is securely closed
• Press the red RESET button each time you
plug in the ALCI safety device.
• A solid amber light is a 30 day cleaning
®
• A fast blinking light indicates the power
®
• A slow blinking light indicates the unit is
• Clean the Truman Cell
®
• Truman Cell
Oreck for service.
• Sparking or popping noise (arcing) can
®
occur when a large particle is captured
in the Truman Cell
excessively, the cell may be dirty. Try
cleaning the Truman Cell
• If excessive arcing continues after proper
cleaning, the Truman Cell
damaged . If damaged, contact Oreck for
service.
Contact Oreck for service.
13
Solution
reminder. Wash Collector Cell. Make sure
it is thoroughly clean before reinstalling.
supply has shut down due to arcing or
short circuit. The cell should be inspected
and cleaned, repaired, or replaced.
in Dry Mode.
may be damaged. Contact
®
. If the unit is arcing
®
.
®
.
®
may be
®