Recording On An Md Using A Timer - Sony MDS-W1 Manual De Instrucciones

Recording on an MD Using a
Timer
This function can begin recording at a specified
starting time, continue recording until a specified
ending time, and then turn off the deck. The Relay
Recording function lets the deck continue recording on
a second MD, making it possible to record even long
programs.
Make sure you have set the clock (see page 6).
MENU/NO YES
§
EJECT
≠ ±
AMS
0 ) r
· P p
≠ AMS ±
TIMER
1
Connect the program source to a digital input
connector on the deck, then select that source on
the amplifier.
Refer to the instructions provided with each
component, and set up the program source
accordingly.
2
Insert a recordable MD into deck A and/or
deck B.
To record for a long time, insert MDs into both
decks.
3
Press MENU/NO twice to display SET UP menu.
4
Turn AMS to select "TIMER REC", then press
AMS (or YES).
5
Turn AMS to select "ONCE" or "WEEKLY", then
press AMS (or YES).
If you select "ONCE", the recording timer
activates only once. If you select "WEEKLY", the
timer activates at the set time on the selected
day(s) of every week.
6
MENU/NO YES
§
EJECT
≠ ±
AMS
0 ) r
· P p
≠ AMS ±
7
Recording on MDs
Set the time to start recording.
1 Turn AMS to select the day indication, then
press AMS (or YES).
When you selected "WEEKLY" in Step 5, the
number of the flashing day indications changes
as follows:
When you activate Turn AMS until
the timer
From Sunday SU, MO, TU, WE, TH, FR,
through Saturday SA indications flash
From Monday MO to FR indications
through Friday flash
From Monday MO to SA indications
through Saturday flash
Any one day of the One of the SU to SA
week indication flashes
The hour indication starts flashing.
2 Turn AMS to set the hours, then press AMS (or
YES).
The minute indication starts flashing.
3 Turn AMS to set the minutes, then press AMS
(or YES).
Set the time to stop recording.
Set the hours and the minutes in the same manner
as described in Step 6.
(Continued)
EN
21