Sony MDS-W1 Manual De Instrucciones página 8

Basic Operations
z
If you insert MDs to both
deck A and deck B, you can
record on both decks at the
same time
Setting A-INPUT and B-INPUT
to the combinations marked
with "®" in the table to the
right lets you record on both
deck A and deck B at the same
time.
Notes
• While one deck is recording or in
recording pause mode, if you
attempt to record on the other
deck using a combination
marked with "—" in the table to
the right, " Impossible"
appears in the display. Select a
combination marked with "®" to
record on both decks.
• If you press A-INPUT or
B-INPUT to change the input
while both decks are recording or
in recording pause mode, INPUT
source that will result in a
combination marked with "—" in
the table to the right does not
appear.
EN
8
4
Press A-INPUT or B-INPUT repeatedly until the program
source you want to record appears in the display.
Press A-INPUT when you record on deck A or press B-INPUT
when you record on deck B. With the remote, press DECK A
or DECK B to select the deck, then press INPUT.
Recording the sound of a component connected to the deck
To record through
DIGITAL OPTICAL IN1
DIGITAL OPTICAL IN2
DIGITAL COAXIAL IN
LINE (ANALOG) IN
Recording from deck A to deck B, or from deck B to deck A
Deck A n Deck B
Digital recording
Analog recording
Deck B n Deck A
Digital recording
Analog recording
Make sure the input for deck A (A-INPUT) and deck B (B-INPUT) is
set to a combination marked with "®" in the table below. When a
combination marked with "—" is selected, you can record on only one
deck.
B-INPUT
ANLG
A-INPUT
ANLG
—
OPT1
®
OPT2
®
ANLG
—
B-MD
B-MD
—
COAX
®
A-INPUT source
Press A-INPUT or B-INPUT to select
OPT1
OPT2
COAX
ANLG
Press B-INPUT to select
A-MD
ANLG A-MD
Press A-INPUT to select
B-MD
ANLG B-MD
ANLG
OPT1 OPT2
A-MD
® ®
—
— ® —
® — —
— — —
— — —
® ® —
® : Simultaneous recording possible
— : Simultaneous recording impossible
B-INPUT source
A-MD COAX
®
—
— ®
— ®
— —
— —
— —