BUTURE BR600 Manual Del Usuario página 9

Charging your devices from the USB output
Use the original manufacturer's USB cable that came with your
device and plug it into one of the USB output ports.You can charge
two devices at the same time.One of the ports has a maximum output
of 9V/2A while the other has a maximum output of 5V/2.4A.Press the
power button once to begin charging your device.The power level
indicator will show the battery level.To check the power capacity
again, simply press the power button once.
To Jump Start Your Car
To jump start the vehicle battery, put the vehicle in park(neutral if the
vehicle has a manual transmission)and engage the emergency
brake. Locate the battery for the vehicle and follow the steps listed
below.
Jump cables are color-coded, RED for POSITIVE(+)and BLACK for
NEGATIVE(-). Do not mix up the cables or allow the metal ends to
touch together because this may damage the battery. charging
system and/or electronics on a vehicle.
Note:
This product is for 12V car only. Check to make sure that 3 or 4
indicator lights are illuminated(battery level is above 50%)before you
use it to start your car.
Step1: Insert the plug of the smart battery
clamp completely into the jump starter. If
the green and red light indicators on the
battery clamp are flashing alternately, you
are safe to move on to the next step.
EN 06