Siemens 4AI TC Manual Del Usuario página 8

Εnglish
•
In configuring the ET 200iSP, you must consider the
permissible number of electronic submodules (see the
ET 200iSP manual, chapter 3.6).
Commissioning
•
The relevant national regulations must be observed when
commissioning the system.
•
When checking the functionality of the equipment, observe
the EN 60 079-17 guidelines. This standard includes the
regulations found in the international standard
IEC 60 079-17.
Technical Data
Voltages, currents, potentials
Isolation
• between channels and
the backplane bus
• between the channels
• between channels and
load voltage (power bus)
Current consumption
• from load voltage L+ (power bus)
Power loss of submodule
Safety data
see corresponding EC special test certificate
For use in the USA or Canada
The control drawing for the ET 200iSP system is supplied
with the Power Supply module. Alternatively, you may find the
latest edition at
http://www.siemens.com/automation/service&support
with the reference A5E00455287.
A5E00308258-05
Yes
Yes, functional
Yes
max. 30 mA
0.4 W
Εnglish