Connecting Components With Digital Audio Input/Output Jacks - Sony TA-FA1200ES Manual De Instrucciones

Connecting components with digital audio input/output
jacks
Connecting to the COAXIAL jack
You can connect a component with coaxial
digital output jacks to this amplifier.
Use a coaxial digital cord (not supplied) to
connect a component to the coaxial jacks
(DIGITAL 1 to 3).
Coaxial digital cord (not supplied)
Note
When DIGITAL 1, 2, or 3 is selected, the selected
input signal is output from the DIGITAL 4 OUT
jack. When DIGITAL 4 or analog input is selected,
no signal is output from the DIGITAL 4 OUT jack.
8
GB
MD deck,
DAT deck,
Satellite tuner
(for the IN jack only)
Connecting to the OPTICAL jack
You can connect a component with optical
digital output jacks to this amplifier.
Use an optical digital cord (not supplied) to
connect a component to the optical jacks
(DIGITAL 4).
When connecting optical digital cords, insert
the plugs straight in until they click into place.
Optical digital cord (not supplied)
Super Audio CD player,
CD player,
DVD player,
DVD recorder
Tip
All the digital audio jacks are compatible with 32
kHz, 44.1 kHz, 48 kHz, and 96 kHz sampling
frequencies.