Clearing The Memory; Transferring Records - Acon On Call Vivid Pal Manual Del Usuario

Clearing the Memory

Extreme caution should be used when clearing the memory. This is not a
reversible operation. To clear the memory:
1. With the meter off, press and hold the <▲> button
for two seconds. This will turn on the meter and
enter the delete mode.
2. To clear the memory, press and hold both the <▲>
and <▼> buttons for two seconds.
3. The display will show "MEM" and "---", the meter
will clear its memory and turn itself off after a
moment.
4. If you entered the delete mode but want to exit without deleting the
recorded data, press the <OK> button. This will turn the meter off without
deleting any data.

Transferring Records

The meter can transfer stored information to a Windows-based personal
computer (PC) using an optional data transfer cable and software package. To
make use of this feature, you need the On Call
Software and a data transfer cable from ACON.
1. Install the software to your personal computer (PC) according to the
instructions from the On Call
2. Connect the USB cable to your PC and plug the audio jack of the cable
into the meter data port. Meter automatically enters "PC" mode.
Notes:
● When strip is already inserted into the meter and meter is in the waiting
for sample application mode, at this point if data transfer cable is
All manuals and user guides at all-guides.com
®
Diabetes Management Software Kit.
33
®
Diabetes Management