Parker NitroFlow Lab Guia Del Usuario página 29

What happens
Oxygen level too high
Oxygen level too low
Inlet pressure too high
Inlet pressure too low
Outlet pressure too high
Outlet pressure too low
Inlet temperature too high
Inlet temperature too low
Membrane pressure sensor fails
Outlet pressure sensor fails
Inlet temperature sensor fails
Status of temperature of compressor box 1
Status of temperature of compressor box 2
Oxygen sensor needs to be calibrated
When an alarm is displayed there are two options:
1. Accept
2. Reset
When ACCEPT is touched, the alarm sound will disappear while the alarm level is still exceeded. If the alarm is not
resolved the alarm message will appear again in 24 hours. This function gives you some time to work on the
solution.
When RESET is touched the alarm status is cleared. However, if the alarm still exist it will appear again after the
delay time that has been entered in the alarm settings menu
K3.1.142M Manual NitroFlow Lab
Alarm description
O2 high
O2 low
P-inlet high
P-inlet low
P-outlet high
P-outlet low
T-inlet high
T-inlet low
P-mem sensor fail
P-Outlet sensor fail
T-Inlet sensor fail
Temp comp1
Temp comp2
Calibrate O2 cel
(refer to § 6.3.2) has passed.
Default
Off
Off
Off
Off
Off
Off
On
On
On
On
On
On
On
On
- 28 -