Descargar
Compartir
Imprimir esta página
  1. Manuales
  2. Marcas
  3. Metra Manuales
  4. Accesorios de Automóviles
  5. 95-7376B
  6. Instrucciones de instalación

Metra 95-7376B Instrucciones De Instalación

Ocultar thumbs
1
2
3
4
5
6
7
8

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

Descargar este manual
KIT COMPONENTS
• A) Radio trim panel • B) Radio brackets
A
B
Metra. The World's Best Kits.
®
Hyundai Elantra
Visit
MetraOnline.com
for more detailed information about the product and up-to-date vehicle
specific applications
KIT FEATURES
• ISO DDIN radio provision
• Painted matte black
MetraOnline.com
2017-2018
© COPYRIGHT 2022 METRA ELECTRONICS CORPORATION
95-7376B
I N S TA L L AT I O N I N S T R U C T I O N S
TABLE OF CONTENTS
Dash Disassembly ..................................................2
Kit Preparation .......................................................3
Kit Assembly ..........................................................3
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: 70-7304 (w/o 7-inch display radio)
• 70-7306 (with 7-inch display radio)
Antenna Adapter: N/A (w/o 7-inch display radio)
• 40-KI11 (with 7-inch display radio)
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
Attention!
Let the vehicle sit with the key
out of the ignition for a few minutes before
removing the factory radio. When testing the
aftermarket equipment, ensure that all factory
equipment is connected before cycling the
key to ignition.
REV. 1/6/22 INST95-7376B

Publicidad

loading

Manuales relacionados para Metra 95-7376B

Resumen de contenidos para Metra 95-7376B

  • Página 1 When testing the aftermarket equipment, ensure that all factory equipment is connected before cycling the key to ignition. Metra. The World’s Best Kits. MetraOnline.com ® © COPYRIGHT 2022 METRA ELECTRONICS CORPORATION REV. 1/6/22 INST95-7376B...

  • Página 2: Dash Disassembly

    DASH DISASSEMBLY 1. Open the passenger front door, then unclip 4. Unclip and remove the silver trim panel and remove the trim panel from the side from under the driver’s side A/C vent. of dashboard. Remove the (1) Phillips (Figure D) screw securing the silver trim panel.

  • Página 3: Kit Preparation

    2. Locate the factory wiring harness and panel using the factory hardware. antenna connector in the dash and (Figure B) complete all necessary connections to the radio. Metra recommends using the proper mating adapter from Metra and/ Continue to Kit Assembly or AXXESS. Test the radio for proper operation.
  • Página 4 Log onto www.installerinstitute.edu or call 386-672-5771 for more information and take steps toward a better tomorrow. Metra recommends MECP certified technicians Metra. The World’s Best Kits. MetraOnline.com ® © COPYRIGHT 2022 METRA ELECTRONICS CORPORATION REV. 1/6/22 INST95-7376B...
  • Página 5 Asegúrese de que todas las conexiones de instalación estén seguras antes de realizar un ciclo de encendido para probar este producto. Metra. The World’s Best Kits. MetraOnline.com ® © COPYRIGHT 2022 METRA ELECTRONICS CORPORATION REV. 1/6/22 INST95-7376B...

  • Página 6: Desmontaje Del Tablero

    DESMONTAJE DEL TABLERO 1. Abra la puerta del copiloto. Después, 4. Desenganche y quite el panel de moldura desenganche y quite el panel de moldura plateado desde abajo de la rejilla de aire del lado del tablero. Quite el (1) tornillo acondicionado del copiloto.

  • Página 7: Preparación Del Kit

    Metra recomienda el uso de (Figura B) adaptadores de acoplamiento adecuados de Metra o de AXXESS. Pruebe el radio C ontinúe con el ensamble del kit para asegurarse de que funciona bien. 3. Fije el ensamble a la abertura del tablero con la tornillería de fábrica.
  • Página 8 Log onto www.installerinstitute.edu or call 386-672-5771 for more information and take steps toward a better tomorrow. Metra recomienda MECP técnicos certificados Metra. The World’s Best Kits. MetraOnline.com ® © COPYRIGHT 2022 METRA ELECTRONICS CORPORATION REV. 1/6/22 INST95-7376B...