Routine care for your carpet cleaner
Clean the nozzle
Unplug carpet cleaner from electrical outlet.
® Wipe debris off nozzle and front of cleaner with a damp cloth
(Fig. 31).
Clean the brushes
Unplug carpet cleaner from electrical outlet.
® Remove solution and recovery tanks to prevent possible leaks.
® Tilt cleaner back so handle rests on the floor (Fig. 32).
® Remove any carpet fibers or strings that may be attached to
the brushes (Fig. 33).
Storing your carpet cleaner
Empty solution tank and rinse thoroughly.
Place empty solution tank on carpet cleaner. Turn carpet
cleaner ON. Squeeze trigger and push carpet cleaner forward
and back several times, using the cleaner to pick up the
remaining liquid. This will clear any solution remaining
inside the cleaner.
Empty recovery tank, rinse thoroughly and let air dry.
Allow brushes and underside of carpet cleaner to air dry
thoroughly before storing carpet cleaner on a carpeted or
wood surface.
Push up on the collar (A) and lower the telescoping handle.
Rotate knob (B) backwards to drop the upper handle into
storage position (Fig. 34).
All manuals and user guides at all-guides.com
31
32
33
34
A
Continued §
A
B
11