Carpet Cleaner Basics; Filling The Tank - Hoover SteamVac Spot Manual De Instrucciones

4
B
5
C
6
7
6
All manuals and user guides at all-guides.com

Carpet Cleaner Basics

A
Fill the solution tank
D
NOTE: For best results, use only Hoover detergents.
They are specifically formulated for use with your
SteamVac™ Spot™ carpet cleaner.
the cap ring (C)
back on the tank (Fig. 5).
  Place tank back onto cleaner (Fig. 7), pressing firmly to be
sure tank is fully positioned.
E
Caution:
Surfactants. Avoid contact with the eyes and skin. In case
of contact with eyes, flush with cold water for 15 minutes.
In case of contact with skin, wash with water. If irritation
persists, call a physician.
Unplug carpet cleaner from
electrical outlet.
  Pull up on solution tank handle (A) and
remove solution tank (Fig. 4)
  Turn tank upside down and unscrew cap
(B) (Fig. 5). The cap consists of 2 pieces --
the cap ring (C) and the solution tank
valve (D).
  Pour detergent into tank to detergent fill
line (E) (Fig. 6).
  Fill tank completely with hot tap water.
  Replace cap. Be sure the valve (D) is in
Detergents contain Anionic and Nonionic
before screwing the cap