Description Of The Device; Operation; Inserting/Replacing The Battery - Omnitronic TM-100 Manual Del Usuario

4. DESCRIPTION OF THE DEVICE

OMNITRONIC
Transmitter
T M-100
(1) Antenna
(2) Belt clip
(3) Mic Adj.-control
(4) Battery compartment
(5) Battery cover

5. OPERATION

5.1 Inserting/Replacing the battery

Please refer to the explanations under Operating Determinations.
Open the battery cover on the bottom and remove it.
If replacing the battery, remove the old battery from the battery compartment.
Danger of explosion when battery is replaced improperly.
Only replace by the same type or similar types recommended by the manufacturer.
Remove empty battery in accordance with the instructions of the manufacturer.
Insert the battery (1 standard 9 V battery) and make sure that the poles are correct.
Replace the battery cover and close it.
In order to have a long battery life, you should only use alcaline batteries.
All manuals and user guides at all-guides.com
1
2
®
OMNITRONIC
Typ/Type: OMNITRONIC
Transmitter TM-100
Spannungsversorgung/ www.omnitronic.com
Power supply: 1 battery 9 V B
G000
Gesamtanschlusswert/
Z
Power consumption: RF
max. 2 mW
T 582M
OMNITRONIC SHOWEQUIPMENT GmbH, GERMANY
Carrier frequency:
UHF 798.850 Mhz
3
mic adj.
4
OPEN
5
Caution!
10
6
OFF ON
MUTE
(6) Operation selector OFF/MUTE/ON
(7) Microphone input socket
(8) Battery-LED
(9) Antenna socket
7 8 9
INPUT LOW BATT