Description; Features - Greenlee 6711 Manual De Instrucciones, Servicio Tecnico Y Recambios

DESCRIPTION

This digital voltage and resistance tester is designed for the Field Service Electrician and for other applica-
tions in laboratory work, electronics, and home electrical service or appliance testing and repair.
This tester provides:
• DC and AC voltage measurements up to 700 V (Automatic AC/DC recognition and indication)
• Voltage measurement > 20 V possible with discharged or missing battery
• Continuity test up to approximately 1 k ohms
• Resistance measurement up to 2 k ohms
• Phase testing (single pole)
• Built-in load to avoid interference voltages
• This tester has a built-in load, therefore, the operation and recovery time is specified as follows:
Voltage Range
9 ... 50V
50 ... 300 V
300 ... 700 V
Please note that the recovery time depends on the ambient temperature.

FEATURES

• Digital voltage and resistance tester with phase detector
• Digital LC display, 1999 digits
• DC and AC voltage test up to 700 V
• Automatic polarity indication for DC Voltages
• Automatic switching from AC to DC measuring range
• Built-in load, 1.3W approx. for 277 V
• Continuity test up to approximately 1 k ohms
• Resistance measurement up to 2 k ohms
• Two spring-loaded test probes
• Double-insulated test probes
• Voltage measurement > 20 V possible with discharged or with missing battery
1. Main Body Test Probe
2. Secondary Test Probe
3. LC Display
4. Push "Voltage-Test" button to measure
voltages lower than 20 V
5. Push "Test-Ohm" button for continuity and
resistance measurement
6. Battery case (on rear)
All manuals and user guides at all-guides.com
Operating Time
continuous use
approx. 10 minutes
approx. 30 seconds
6711 Digital Voltage Tester
Required Recovery Time
N/A
10 minutes
10 minutes
2
1
3
TEST < 20V
TEST–OHM 4
5
6
3