Caller Id Solutions; Battery Solutions - GE 27958 Guia Del Usuario

Unit beeps
• Place the handset in the cradle for 20 seconds. If it still beeps, charge battery for 12
hours.
• Clean charging contacts on cordless handset and charge cradle with a soft cloth, remove
comma or an eraser.
• See solutions for "No dial tone" on previous page.
• Replace the battery.
Memory Dialing doesn't work
• Did you program the memory location keys correctly?
• Did you follow proper dialing sequence?
Unit locks up and no communication between the base and cordless handset
• Unplug the AC power supply from the wall outlet and the back of the base. Remove the
handset battery. Wait for 30 seconds and plug the power supply back into the base
and wall outlet. Reconnect the battery and charge for 12 hours.
C ID S
ALLER OLUTIONS
No Display
• Is battery fully charged? Try replacing the battery.
• Make sure that the unit is connected to a non-switched electrical outlet. Disconnect the
AC power supply from the base and reconnect it.
Caller ID Error Message
• The unit displays this message if it detects anything other than valid Caller ID information
during the silent period after the first ring. This message indicates the presence of
noise on the line.
No Caller ID
• In order to receive Caller ID information, you must subscribe to the standard name/
number Caller ID service from your local telephone company.
B S
ATTERY OLUTIONS
If you experience any of the following problems, even after fully recharging the battery, you
may need to replace the battery pack:
• Short talk time
• Poor sound quality
• Limited range
All manuals and user guides at all-guides.com
41