Getting The Most Out Of Dolby Pro Logic Surround Sound - Sony STR-DE375 Manual De Instrucciones

Using Surround Sound
Adjusting the Effect Level (all sound fields
except PRO LOGIC)
You can make the surround sound more prominent by
increasing the EFFECT level. This control lets you
adjust the "presence" of the surround effect in six steps
(1-6).
1
Start playing a program source.
2
Press SURR.
The effect level ("EFFECT 1" ... "EFFECT 6")
appears on the display.
3
Press MENU +/– to select the level you prefer.
When you use the remote
Press MAIN MENU on the remote repeatedly until the
SURR indicator lights up. Each time you press
MENU +/–, the effect level changes as follows:
EFFECT 1 y EFFECT 2 y ... y EFFECT 6
Note
Changing the effect level may not produce major variations
in the surround effect when used with certain playback
sources.
16 GB
Getting the Most Out of Dolby
Pro Logic Surround Sound
To obtain the best possible Dolby Pro Logic Surround
sound, first select the center mode according to the
speaker system you have. Then, adjust each speaker
volume and delay time.
Note that you must have at least one additional pair of
speakers and/or one center speaker to do the following
adjustments.
SOUND FIELD
SET UP MODE +/–
MENU </> MENU +/–
TEST TONE
MAIN
MENU
MENU +/–
Selecting the center mode
The receiver offers you four center modes: Phantom,
Normal, Wide and 3 STEREO. Each mode is designed
for a different speaker configuration. Select the mode
that best suits your speaker's system configuration:
1
Press SOUND FIELD ON/OFF to turn on the
sound field.
2
Press SOUND FIELD MODE +/– repeatedly to
select the Dolby surround sound field (PRO
LOGIC or C STUDIO mode).
3
Press SET UP.
4
Press MENU < or > repeatedly until "CTR
MODE" appears on the display.
LEVEL
SOUND FIELD
ON/OFF
SOUND FIELD
MODE +/–
MENU </>