Tabla de contenido
Publicidad
HARDWARE CONTENTS
AAA
Thread Tape
x 1
SAFETY INFORMATION
• Follow these installation instructions carefully. Proper installation is the installer's responsibility.
• Failure to follow correct installation procedures can cause the faucet to become loose, which can
result in serious injury.
• The products should be installed by a locally licensed plumber.
NOTE: Please DO NOT use plumber's putty on plastic components. Use silicone caulk if sealant is
required.
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list and hardware contents list. If any part is missing or damaged, do not attempt to
assemble the product.
Estimated Assembly Time: 12 minutes
Tools Required for Assembly (not included): Adjustable Wrench, Silicone Sealant.
Helpful Tools (not included): Supply stops, Supply tubing/fittings, Basin wrench, Safety goggles.
• Prior to beginning installation, turn off the cold and hot water lines and turn on the old faucet to
release built-up pressure.
• When installing your new faucet, first, hand-tighten connector nuts. Then, use one wrench to hold
the fitting and a second wrench to tighten the nut an additional 1/4 turn. Connections that are too
tight will reduce the integrity of the system.
3
Publicidad
Tabla de contenido
