Instructions For Use; Add Function - Detectalia Banknote Detector V800 Manual De Uso

7. Instructions for use

The user can select the counting function according to the different requirement. This machine is equipped with the memory function. When turn on the
machine, it will save the previous setting (except the ADD function).
7.1 Turn on/off
The user can press the power switch
Note: the machine will start self-check after turning on. During the self-check, if there is some problem with the sensor, then it will show the error code
in the display (the details please refer to 9. Error message display / 10. Fault code and resolutions).
7.2 Automatic / manual counting
Press MENU, then to choose "LEVELS" (see Pic 5-4) with CUR or ADD and FACE or BATCH, then press START | ENTER or START || ENTER to go to
"AUTO". Press CUR or ADD to increase number or and FACE or BATCH to decrease number: "0"is the manual counting and "1" is the automatic counting.
Then press START | ENTER or START || ENTER to confirm and press ORIENT or +1/+10 to back to the previous interface.
Note: in the "AUTO" counting, if the notes are very old or dirty, then it will stain the start sensor and won´t work.

7.3 ADD function

Press ADD to turn on/off the ADD function. When the display show "ADD", it means the ADD function is on; otherwise, the ADD function is off. The ADD
function can work with Batch function.
to turn on/off the machine.
V800
17