Removing The Cover; Replacing The Cover; Cleaning - Foppapedretti SKILL i-Size Manual De Instrucciones

• No parts of belt should be twisted.

9. REMOVING THE COVER

• Seat cover: release the elastics and unclasp the press studs at the rear and on the
seat cover. Remove the cover by sliding it off along the outer edge and the edge of
the seat recliner device, pulling gently.
• Backrest cover: remove the cover from the side wings by sliding it off along the
outer edge of the wings and pulling gently. Unhook the velcro and remove the
backrest cover.
• Headrest cover: remove the headrest cover by sliding it off along the outer edge
and the edge of the chest belt guide, pulling gently.

10. REPLACING THE COVER

• Chair cover: put the cover on the seat, slide it onto the outer edge and the edge of
the seat recliner device. Attach the press studs and the elastics to the rear.
• Backrest cover: put the cover onto the outer edge of the wings, fasten the velcro
flap to the backrest.
• Headrest cover: slide the headrest cover onto the outer edge and the edge of the
chest belt guide. Check the cover is correctly positioned on the outer edge of the
car seat.

11. CLEANING

The child seat must not be used without the seat cover.
The cover can be washed with a mild detergent using the washing machine's cycle for
delicate items (30°C).
The colors of the cover may fade if it is washed at more than 30°C.
Do not spin, and never tumble dry in an electric clothes dryer (the fabric may separated
from the padding).
The plastic parts can be cleaned using soap warer.
Do not use harsh cleaning agents (such al solvents).
• ENGLISH •
USE IN THE VEHICLE
28