Assembly - FITFIU FITNESS BP-30 Manual Usuario

ASSEMBLY

STEP 1:
Connect the bracket tube (2) to the rear base tube (1), use the hex bolt M10x55 (25), washer D10 (32) and
a nylon nut M10 (35) fixed and locked, then use a hex bolt M8x16 (24) and a washer D8 (24) and washer D8 (33) fixed
and locked.
Place the connection tube (4) between the support tube (2), use the hex bolt M10x55 (25) and washer M10 (32).
Washer (32) and Nylon Nut M10 (35) fixed and locked.
Connect the butterfly arm (5) and the bracket tube (2), insert the hex bolt M10x110 (26), fix the lock with Washer D10
(32) and Nylon Nut M10 (35) Tighten, and repeat the process on the right side.
Insert the handle bar (9) into the wing arm (5), fasten with Washer D10 (32) and Flower Nut(19), repeat the process on
the right side.
Put the adjustable bar frame (7) on the left support tube (2), fix it with the flower knob (28).
Put the hand support tube (37) on the adjustable bar frame (7), the PVC pipe sleeve (34). Fix with hex screw M8x20 (30)
and washer D10 (33). Above the bar safety lock (20) and the plastic for bar support (36) are installed on the adjustable
bar frame(7) , repeat the same process on the right side.
36