Installation And Set-Up - Glatz Suncomfort Flex Roof Manual De Instrucciones

Installation and set-up

2.2
2.1 2.3
1
Unpack the balcony roof
Supplied with:
- Roof element with joining part
- Top pole with joining part
- Lower pole with locking screw
- Mounting kit with locking screw,
washer and screw for pivot joint
- Operating instructions
!
Please dispose of the packing ma-
terial appropriately and keep away
from children. Do not make use of
defective material. In the event of
any damage, inform the transport
service provider immediately.
2
Prepare balcony roof pole
1. Push the upper pole completely into
the lower pole
2. Insert and tighten the clamping
screw
3. Check that it is firmly attached
!
In order to avoid damages, do not
over-tighten the clamping screw.
36 37
3.1
3.2
4.1
4.4
3
Place balcony roof pole in base
Set up base on even and stable
surface.
1. Place balcony roof pole in base
2. Tighten the base tube clamp
i
Suitable floor mounts are available
from your SUNCOMFORT/GLATZ
dealer.
4
4.2
Attach roof element
1. Align and attach the joining part
of the roof element with the joining
part of the top pole
2. Attach screw for pivot joint from the
back side
4.3
3. Slide on washer and attach / tight-
en locking screw
4. Check that it is firmly attached
i
In order to avoid damages, do not
over-tighten the clamping screw.