General Features - Reggiani KYLIOS Instrucciones Para El Instalación

KYLIOS | ENG |

GENERAL FEATURES

The KYLIOS product line is composed of
track mounted adjustable projectors:
KYLIOS conforms to directives:
• 2006/95/EC (LV)
• 2004/108/EC (EMC)
• 2009/125/EC (Ecodesign)
• 2002/96/EC (WEEE)
• 2011/65/EC (RoHS)
and to safety standards:
• EN 60598-1
• EN 60598-2-1.
For more technical information about
the product (photometric, electrical data,
size, weight, certification, etc.) refer
to the catalogue or access the product
datasheet on the website:
www.reggiani.net/codice
www.reggiani.net
All manuals and user guides at all-guides.com
ASSEMBLY INSTRUCTIONS
WARNINGS
Before assembling the projector, carefully
read these instructions to make sure the
luminaire functions correctly and safely.
Keep the instructions in a safe place for
future consultation; contact your supplier
for any problems that may arise.
The projector must not be modified.
Modifying the luminaire in any way
invalidates the guarantee of conformity
with standards and directives in force
and it could make the actual projector
hazardous.
Reggiani SPA Illuminazione shall not be
held liable for any damage caused by
one of its projectors if not assembled in
conformity to the following instructions.
The projector must be installed in
accordance
standards.
Before connecting the projector, make
sure the mains power supply corresponds
to the power indicated on the projector
label.
The electrical installation the projector is
connected to must be wired in conformity
to the laws in force.
with the best working
010
As a safety guarantee, any components
damaged while operating
replaced with the same components
before the projector is used again.
The minimum distance between the
projector and the lighted object must
be 0.5 m for LEDs and 0.8 m for METAL
HALIDE LAMPS.
Never cover the projector during use.
Never use abrasives or solvents to clean
the glass.
must be