Programming The Receiver Operating Frequency - Emerson 4th AVENUE Manual Del Usuario

9. Programming the Receiver Operating Frequency

PROGRAMMING THE RECEIVER
OPERATING FREQUENCY
9.1
Turn the Wall Control ON/OFF Switch to the "OFF"
position.
Restore Electricity to the Ceiling Fan Branch Circuit at
the Circuit Breaker or Fuse Box.
Flip the Wall Control's ON/OFF Switch to "ON" position.
Within one minute of flipping the Switch to "ON", push
and hold the FAN OFF Button (
to set the Code in the Receiver. The ceiling fan lights
(if installed) will blink to indicate the Wall Control Code
has been paired with the Receiver.
All manuals and user guides at all-guides.com
9.2
If programming is unsuccessful, retry the Step 9.1
instructions after cycling the Wall Control ON/OFF
Switch to restart the 1 minute programming time period.
9.3
If still unsuccessful, shut off the Electricity at the Fuse
Box or Breaker Panel and change the Wall Control
frequency (page 18). After changing the Frequency
settings, repeat Step 9.1 within one minute of restoring
the Electricity.
) for 3 to 5 seconds
23
Please contact 1-800-654-3545 for further assistance
ETL Model No.: CF766L
emersonfans.com