Portfolio E3A Manual De Instrucciones página 5

3. To install fixture head (sold separately) to adapter (A), use
fixture screws provided with fixture head and secure tightly.
4. Secure the bottom
previously removed screws. Tighten with a Phillips
screwdriver.
5. Remove the preassembled set screw from the middle pole
(B) and secure the middle pole (B) onto the bottom pole (C).
Screw middle pole (B) clockwise, then secure with set screw.
Tighten with wrench (FF).
Quincaillerie utilisée
Clé
FF
pole (C) to the base (D) with the
x 1
5
4
D
5 B
C
FF
C