Care And Maintenance; Applicable Standards - HEINE QUALITY EN50 Instrucciones De Manejo

Care and maintenance

All manuals and user guides at all-guides.com
- A lways disconnect from the mains before cleaning.
- A soft cloth can be used to wipe all surfaces clean.
- It is possible to wipe with a damp cloth. If a cleanser is used, it must be
approved for use on plastics.
- Disinfectant cleaning can be done using an alcohol-based surface disinfectant.
- Spray disinfection, soaking or disinfection in a machine is not permitted.
- Check the function of each unit regularly.
- Use the units only when they are functioning correctly.
Specifications
HEINE EN50:
®
Mains voltage:
Safety class:
Current consumption:
Output:
Fuse:
Duration of use:
Classification:
Length of cord:
HEINE mPack:
®
Output:
Fuse:
Charging current limit:
Weight:
Dimensions:
Rechargeable Battery HEINE
Ambient conditions:
Relative humidity:
Air pressure:
Cell type:
Nominal voltage:
Capacity:
Charging current:
Capacity/Working time:
Fuse:
Weight:
Dimensions:

Applicable Standards

ISO 7000: 2004
EN 980:1996
IEC 60601-1: 2005 (Medical Electrical Equipment – General Requirements
UL 60601-1: 2003
100–240 V~ / 50–60 Hz
Double insulated
max. 30 VA
7,2 V = (The output voltage modulation depends
on the instrument in use.)
Integral overload protection
Continuous
Typ B
200 cm
Variable, max. 6,5 V / 10 W
Integral overload protection
3 A
ca. 300 g
80 mm x 28 mm x 125 mm
Li-ion mPack:
®
In use: +10 °C to +40 °C
Storage: +5 °C to +45 °C
Transport: –20 °C to +45 °C
10% to 75%
700 hPa to 1060 hPa
Li-ion
7,2 V
ca. 4000 mAh
1–3 A, depending on the light source, conditions
of use and state of charge of the battery.
Depends on bulb type and brightness, e.g. 5 W
bulb/HEINE OMEGA
maximum brightness.
integrated overload protection
ca. 185 g
70 mm x 73 mm x 19 mm
(Graphical symbols for use on equipment)
(Graphic symbols for use on equipment)
for Safety)
(General requirements for Safety for Medical Electrical
Equipment)
500 ca. 150 minutes at
®