LEXIBOOK SC300i Manual De Instrucciones página 7

All manuals and user guides at all-guides.com
Enter data then press [DATA]
To enter multiples of the same data: Enter data [,] its frequency [DATA]
[Data Correction]
Correction prior to pressing [DATA] :
Delete incorrect data with [ON/C]. If you have not pressed [,] after entering an
incorrect value, this value can be corrected with
Correction after pressing [DATA]
If you have pressed [DATA] but no other key, delete the incorrect data with
[CD].
2ndF
If you have performed any other operation, reenter the data to be correct and
press [CD].
2ndF
[Recalling Statistics]
• The value of x , sx, σx, n, Σx et Σx² can be viewed by pressing
the corresponding key.
Currency Setting and Recall
Operation key in Currency Conversion mode:-
In Currency Conversion mode, twelve currencies are available and you can scroll
through these currencies by pressing [2ndF][cos] or [2ndF][tan].
* There are eleven fixed currency conversion rate and one user programmable rate.
Select the currency conversion rate :-
MODE [3]
You can press [cos] consecutively to select the conversion rate between the
desired currency and Euro.
[2ndF] [cos]
[cos]
[cos]
[cos]
[cos]
© Lexibook 2005
[cos]
[cos]
.
DEL
[cos]
[cos]
followed by [cos]
RCL
[cos]
[cos]
Press [cos] again to go back to "C.CONV:".
C.CONV :
Instead of pressing [2ndF][cos], you can press [2ndF][tan] an then [tan] to scroll
through all the currencies above in the reverse order.
BEF =
4 0. 3 3 9 9
Currency conversion :-
DEM =
Below is an example to convert DM100 to Euro.
1. 9 5 5 8 3
ESP =
Enter "100 / " first.
1 6 6. 3 8 6
FRF =
6. 5 5 9 5 7
÷
Press to obtain the conversion.
IEP
0. 7 8 7 5 6 4
Then select the conversion rate by pressing [2ndF][cos] or[2ndF][tan].
I T L =
1 9 3 6 2 7 .
LUF =
4 0. 3 3 9 9
NLG =
2. 2 0 3 7 1
ATS =
1 3. 7 6 0 3
PTE =
2 0 0. 4 8 2
FIM =
5. 9 4 5 7 3
c12 =
this value is 1 by default.
Otherwise the user can
define it.
C.CONV :
1 0 0 /
1 0 0 / 1. 9 5 5 8 3 _
6