Operating
Instructions
Controls
Controls
Remote Control Operations
• CAUTION
When the air conditioner has been performing its cooling operation and is turned off or set to the fan position,
wait at least 3 minutes before resetting to the cooling operation again.
Function
Controls
Remote Control Operations
• FOR NORMAL COOLING
1. Turn the MODE Knob to the HI COOL setting from
the LOW COOL setting.
2. Set the TEMP control to the desired temperature
mark (5 the mid-point is a good starting position).
If the room temperature is not satisfactory after a
reasonable time, adjust the control to a cooler or
warmer setting, as appropriate.
• FOR QUIETER OPERATION
1. Turn the MODE Knob to the LOW COOL setting.
2. Set the TEMP control as needed.
All manuals and user guides at all-guides.com
About the Controls on the Air Conditioner
- Turns air conditioner off.
- Med speed fan operation without cooling.
- Low speed fan operation without cooling.
- Cooling with high speed fan operation.
- Cooling with med speed fan operation.
- Cooling with low speed fan operation.
This automatically controls the temperature of the indoor air.
Turn the knob so that arrow point to the higher number for greater cooling.
Point the arrow to the lower number for more moderate cooling.
(i.e. the higher number the greater cooling)
• FOR MAXIMUM COOLING
1. Turn the MODE Knob to the HI COOL
setting.
2. Set the TEMP control to the highest
temperature mark ( ).
6