Sunny PRO II MAGNETIC Manual Del Usuario página 16

We value your experience using Sunny Health and Fitness products. For assistance with parts or
troubleshooting, please contact us at support@sunnyhealthfitness.com or 1-877-90SUNNY (877-
.
907-8669)
STEP 4:
Loosen and pull out the [main frame seat
post] Pop-pin Knob (No. 91). Insert Seat
Post (No. 4) into the sleeve located on the
back of the Main Frame (No. 1). Adjust the
Seat Post (No. 4) to the desired position
and reinsert and tighten Pop-pin Knob (No.
91) to secure the post in place.
Loosen and pull out the [seat slider] Pop-pin
Knob (No. 91). Insert Seat Slider (No. 5)
into the Seat Post (No. 4). Adjust the Seat
Slider (No. 5) to the desired position and
reinsert and tighten Pop-pin Knob (No. 91)
to secure the post in place.
Secure Seat (No. 95) to the Seat Slider
(No. 5) with Wrench (No. 107).
NOTE: In order to properly tighten the seat,
you will need one open faced wrench to
tighten the nut on each side in opposite
directions of each other.
STEP 5:
Loosen and pull out the [main frame
handlebar post] Pop-pin Knob (No. 91).
Insert Handlebar Post (No. 6) into the
sleeve located on the front of the Main
Frame (No. 1). Adjust the Handlebar Post
(No. 6) to the desired position and reinsert
and tighten the Pop-pin Knob (No. 91) to
secure the post in place.
Attach the Handlebar (No. 7) to the
Handlebar Post (No. 6) using 2 Carriage
Bolts (No. 29), 2 Flat Washers (No. 25)
and 2 Nylon Nuts (No. 38). Tighten and
secure with Spanner (No. 104).
15