Honeywell HCM-890 Serie Manual Del Propietário página 5

FILLING CONTINUED
NOTE: WHEN CARRYING THE FILLED WATER TANK, PLEASE USE THE HANDLE
AND PLACE YOUR OTHER HAND UNDER THE TANK FOR ADDITIONAL
SUPPORT.
• Place the Motor Housing back onto Rinse-to-Clean™ Base.
• Once the filled tank has been positioned, do not attempt to move the
humidifier. If it has to be moved, unplug the humidifier and remove the
water tank first.
NOTE: DO NOT POUR WATER INTO THE GRILL ON THE TOP OF THE
MOTOR HOUSING. DOING SO MAY DAMAGE THE HUMIDIFIER OR CAUSE
PERSONAL INJURY.
OPERATION
CAUTION: DO NOT PLUG IN THE HUMIDIFIER WITH WET HANDS AS AN
ELECTRIC SHOCK COULD OCCUR.
P O W E R
• With the power switch in the OFF position, plug
the filled humidifier into a polarized 120V outlet.
DO NOT FORCE THE POLARIZED PLUG INTO THE
OUTLET; it will only fit one way.
H U M I D I T Y C O N T R O L
1. Set the fan speed control to the desired position
(Fig. 4).
HIGH: For fast humidifying
LOW: For quieter operation
NOTE: The length of time your humidifier runs will vary depending on the
quality of construction and insulation of your room and house, as well as the
fan speed.
2. Turn the humidifier OFF if the humidity level feels too moist or you notice
condensation forming on the walls and/or windows.
ALWAYS be sure to empty any unused water in the Rinse-
to-Clean™ Base and/or Water Tank each time you refill the
water tank or finish using the humidifier.
NOTE: To ensure proper humidity in your home,
you should use a hygrometer (room humidity
indictor) such as the E-10 and place across the
room from your humidifier. (Hygrometer
sold separately)
All manuals and user guides at all-guides.com
Fig. 4