Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
4.7 LEARNING ADDITIONAL MASTER CARDS
To learn an additional MASTER card, just follow these steps.
DESCRIPTION
Pass a MASTER card already matched with the reader
You will hear a short beep periodically indicating that
you can learn a MASTER card
Pass the new MASTER card to be learned on the
receiver
A short beep will indicate that the card has been learned
correctly.
NOTES: The learning process will end immediately afterwards.
4.8 DELETING MASTER CARDS
To delete a MASTER card, simply follow these steps.
DESCRIPTION
Pass 4 times a MASTER card matched to the reader
other than the one you want to delete
A short beep will be heard periodically to indicate that a
MASTER card can be deleted
Pass the MASTER card to be deleted on the receiver
A short beep will indicate that the card has been deleted
successfully.
4.9 DELETION OF MASTER AND USER CARDS MEMORY
To delete the entire card memory you will need to follow these steps:
DESCRIPTION
1. Turn off the automatic door.
2. Press and hold the P1 button on the reader
3. Turn on the automatic door.
4. The LED will flash for 10 seconds after which the cancellation will begin.
5. Once the cancellation is complete, the LED will remain on
6. Release the reader button P1
4.10 ERROR REPORTING VIA BEEP
DESCRIPTION
• Deleting a USER or MASTER card that is not in memory.
• Assigning the same channel to a USER card.
• Empty memory, no card present.
• The absence of the BUS network, for example if the EASY2 selector is in
use during configuration and/or parameter consultation.
EXAMPLE
MASTER
MASTER
EXAMPLE
MASTER
MASTER
BEEP
<1s +
<1s
<1s
BEEP
<1s +
<1s
<1s
BEEP
<0.5s
<0.5s +
<0.5s
Publicidad
Tabla de contenido
