Door Features; Door Rails Or Trivets; Can Racks And Door Bins; Refrigerator Care - Kenmore 106.3254 Serie Manual De Uso Y Cuidado

DOOR FEATURES

Your model may have some or all of these features. Features that
can be purchased separately as product accessories are labeled
with the word "Accessory." Not all accessories will fit all models.
See the "Assistance or Service" section if you are interested in
purchasing one of the accessories.

Door Rails or Trivets

The door rails or trivets may be removed for easier cleaning.
Snap on Door Rails or Trivets (on some models)
To Remove and Replace the Rails or Trivets:
1. Depending on your model, remove the rails or trivets by
pushing in slightly on the front of the bracket while pulling out
on the inside tab. Repeat these steps for the other end.
2. Replace the rails or trivets by aligning the ends of the brackets
with the buttons on the sides of the door liner. Firmly snap
bracket and assembly onto the tabs above the shelf as shown.
Style 1 - Door Rails
Style 2 - Trivets
Drop-in Door Rails (on some models)
To Remove and Replace the Rails:
1. Remove all items from the shelf and pull straight up on each
end of the rails.
2. Locate each end of the rail above the rail's pocket opening,
and push the rail straight down until it stops.

Can Racks and Door Bins

(on some models)
NOTE: Can racks may be purchased as an Accessory for some
models.
To Remove and Replace the Racks/Bins:
1. Remove the rack/bin by lifting it and pulling it straight out.
16
All manuals and user guides at all-guides.com
2. Replace the rack/bin by sliding it in above the desired support
Both the refrigerator and freezer sections defrost automatically.
However, clean both sections about once a month to keep odors
from building up. Wipe up spills immediately.
IMPORTANT: Because air circulates between both sections, any
odors formed in one section will transfer to the other. You must
thoroughly clean both sections to eliminate odors. To avoid odor
transfer and drying out of food, wrap or cover foods tightly.
To Clean Your Refrigerator:
NOTE: Do not use abrasive or harsh cleaners such as window
sprays, scouring cleansers, flammable fluids, cleaning waxes,
concentrated detergents, bleaches or cleansers containing
petroleum products on plastic parts, interior and door liners or
gaskets. Do not use paper towels, scouring pads, or other harsh
cleaning tool.
1. Unplug refrigerator or disconnect power.
2. Hand wash, rinse, and dry removable parts and interior
3. Wash stainless steel and painted metal exteriors with a clean
4. Plug in refrigerator or reconnect power.
and pushing it down until it stops.

REFRIGERATOR CARE

Cleaning

WARNING
Explosion Hazard
Use nonflammable cleaner.
Failure to do so can result in death, explosion, or fire.
surfaces thoroughly. Use a clean sponge or soft cloth and a
mild detergent in warm water.
sponge or soft cloth and a mild detergent in warm water. Dry
thoroughly with a soft cloth.
NOTE: To keep your stainless steel refrigerator looking like new
and to remove minor scuffs or marks, it is suggested that you
use the manufacturer's approved Stainless Steel Cleaner and
Polish. To order the cleaner, see the "Accessories" section.
IMPORTANT: This cleaner is for stainless steel parts only!
Do not allow the Stainless Steel Cleaner and Polish to come into
contact with any plastic parts such as the trim pieces, dispenser
covers or door gaskets. If unintentional contact does occur,
clean plastic part with a sponge and mild detergent in warm
water. Dry thoroughly with a soft cloth.