Moving Recorded Tracks; (Move Function) - Sony ZS-M35 Manual De Instrucciones

Moving recorded
tracks

(Move Function)

You can change the order of the tracks.
After you move the track, the track
numbers are renumbered automatically.
Note
you stop recording,
do not disconnect the
mains lead or move
the player while "TOC
EDIT" is flashing in
the display. If you do
so, recording may not
be done properly.
GB
50
Editing recorded tracks on the MD
Example: Moving C to the position of track 1
Track
After
number
Moving
1
Play the track you want to move.
2
Press EDIT repeatedly until "Track Move" appears
in the display.
3
Press YES•ENTER.
"tTrack 003?" appears in the display, and one-
track repeat play starts.
4
Press the number/characters buttons to select the
new track position.
If you want to cancel the move function at this
point:
Press NO•CANCEL or MD x.
5
Press YES•ENTER.
"Complete" appears in the display for a few
seconds after the track is moved.
YES Number/character
buttons
ENTER
1 2 3
A B
Track number of the C changes to 1
1
2
C A
EDIT
4
D
C
4
3
B D