Trotec TVM 12 Manual De Instrucciones página 10

TVM 12 / TVM 14 / TVM 18 / TVM 20 D
Storage
Before storing the device, proceed as follows:
When the device is not being used, observe the following storage
conditions:
• dry and protected from frost and heat
• in an upright position where it is protected from dust and direct
sunlight
• with a cover to protect it from invasive dust if necessary
• Place no further devices or objects on top of the device to
prevent it from being damaged.
Errors and faults
The device has been checked for proper functioning several times
during production. If malfunctions occur nonetheless, check the device
according to the following list.
The device does not start:
• Check the power connection.
• Check the power cable and mains plug for damages.
• Check the on-site fusing.
• Observe the operating temperature according to the Technical
data chapter.
• Wait for 10 minutes before restarting the device. If the device is
not starting, have the electrics checked by a specialist company
or by Trotec.
The fan does not start:
• Check whether the unit is switched on.
• Check the power supply and whether the plug or cable is
defective.
The device is loud or vibrates:
• Check whether the device is set up in a stable and upright
position.
Wait for at least 3 minutes after maintenance and repair work. Only
then switch the device back on.
Your device still does not operate correctly after these checks?
Please contact the customer service. If necessary, bring the device to
an authorized specialist electrical company or to Trotec for repair.
Maintenance
The device does not require maintenance.
10
Cleaning
Warning of electrical voltage
Do not touch the mains plug with wet or damp hands.
• Switch off the device.
• Hold onto the mains plug while pulling the power cable out of the
mains socket.
Clean the device with a soft, damp and lint-free cloth. Ensure that no
moisture enters the housing. Protect electrical components from
moisture. Do not use any aggressive cleaning agents such as cleaning
sprays, solvents, alcohol-based or abrasive cleaners to dampen the
cloth.
TRT-BA-TVM12-TVM14-TVM18-TVM20D-TC-001-INT