PNI IP240 Manual De Usuario página 5

the screen
• Click on the result (change the name of the camera, if you wish) and
confirm from the top right corner.
• The camera will appear online in the application.
• Continue setting up the camera, the procedure described on page 7
"Connect the camera to the WiFi network".
Configure and view the camera on the mobile phone
Note:
To add and configure the camera through the application, the
camera and the mobile phone must be connected to the same
router (the phone via WiFi to the 2.4 GHz network, and the
camera through the cable LAN cable, as described above).
The default username and password of the camera are admin.
Connect the network cable to the router and to the RJ45 connector of the
camera.
Warnings:
The router must be connected to the internet.
Check if the LAN port in the router where you will connect the camera has internet
access. Use a laptop or PC connected to this port. Green network indicator means
that the transmission of network data is normal.
5 User manual