Electrical Safety - STERWINS 40VHT2-60.1 Manual Del Usuario

FR 2.4 WORK AREA SAFETY
• KEEP WORK AREA CLEAN AND WELL LIT. CLUTTERED OR DARK AREAS
INVITE ACCIDENTS.
ES
• DO NOT OPERATE MACHINES IN EXPLOSIVE ATMOSPHERES, SUCH AS
IN THE PRESENCE OF FLAMMABLE LIQUIDS, GASES OR DUST. MACHINES
CREATE SPARKS WHICH MAY IGNITE THE DUST OR FUMES.
PT

2.5 ELECTRICAL SAFETY

• MACHINE PLUGS MUST MATCH THE OUTLET. NEVER MODIFY THE
IT
PLUG IN ANY WAY. DO NOT USE ANY ADAPTER PLUGS WITH EARTHED
(GROUNDED) MACHINES. UNMODIFIED PLUGS AND MATCHING OUTLETS
WILL REDUCE RISK OF ELECTRIC SHOCK.
EL
• AVOID BODY CONTACT WITH EARTHED OR GROUNDED SURFACES,
SUCH AS PIPES, RADIATORS, RANGES AND REFRIGERATORS. THERE IS
PL
AN INCREASED RISK OF ELECTRIC SHOCK IF YOUR BODY IS EARTHED OR
GROUNDED.
• DO NOT EXPOSE MACHINES TO RAIN OR WET CONDITIONS. WATER
RU
ENTERING A MACHINE WILL INCREASE THE RISK OF ELECTRIC SHOCK.
2.6 PERSONAL SAFETY
KZ
• STAY ALERT, WATCH WHAT YOU ARE DOING AND USE COMMON SENSE
WHEN OPERATING A MACHINE. DO NOT USE A MACHINE WHILE YOU ARE
TIRED OR UNDER THE INFLUENCE OF DRUGS, ALCOHOL OR MEDICATION.
UA
A MOMENT OF INATTENTION WHILE OPERATING MACHINES MAY RESULT IN
SERIOUS PERSONAL INJURY.
• USE PERSONAL PROTECTIVE EQUIPMENT. ALWAYS WEAR EYE
RO
PROTECTION. PROTECTIVE EQUIPMENT SUCH AS DUST MASK, NON-SKID
SAFETY SHOES, HARD HAT, OR HEARING PROTECTION USED FOR APPROPRIATE
EN
CONDITIONS WILL REDUCE PERSONAL INJURIES.
• PREVENT UNINTENTIONAL STARTING. ENSURE THE SWITCH IS IN
THE OFF-POSITION BEFORE CONNECTING TO POWER SOURCE AND/OR
BATTERY PACK, PICKING UP OR CARRYING THE TOOL. CARRYING MACHINES
WITH YOUR FINGER ON THE SWITCH OR ENERGISING MACHINES THAT HAVE
THE SWITCH ON INVITES ACCIDENTS.
• REMOVE ANY ADJUSTING KEY OR WRENCH BEFORE TURNING THE
MACHINE ON. A WRENCH OR A KEY LEFT ATTACHED TO A ROTATING PART OF
THE MACHINE MAY RESULT IN PERSONAL INJURY.
• KEEP CHILDREN AND BYSTANDERS AWAY WHILE OPERATING A
MACHINE. DISTRACTIONS CAN CAUSE YOU TO LOSE CONTROL.
• DO NOT ABUSE THE CORD. NEVER USE THE CORD FOR CARRYING,
PULLING OR UNPLUGGING THE MACHINE. KEEP CORD AWAY FROM HEAT,
OIL, SHARP EDGES OR MOVING PARTS. DAMAGED OR ENTANGLED CORDS
INCREASE THE RISK OF ELECTRIC SHOCK.
• WHEN OPERATING A MACHINE OUTDOORS, USE AN EXTENSION CORD
SUITABLE FOR OUTDOOR USE. USE OF A CORD SUITABLE FOR OUTDOOR USE
REDUCES THE RISK OF ELECTRIC SHOCK.
• IF OPERATING A MACHINE IN A DAMP LOCATION IS UNAVOIDABLE, USE
A RESIDUAL CURRENT DEVICE (RCD) PROTECTED SUPPLY. USE OF AN RCD
REDUCES THE RISK OF ELECTRIC SHOCK.
• DO NOT OVERREACH. KEEP PROPER FOOTING AND BALANCE AT ALL
TIMES. THIS ENABLES BETTER CONTROL OF THE MACHINE IN UNEXPECTED
SITUATIONS.
• DRESS PROPERLY. DO NOT WEAR LOOSE CLOTHING OR JEWELLERY.
KEEP YOUR HAIR, CLOTHING AND GLOVES AWAY FROM MOVING PARTS.
LOOSE CLOTHES, JEWELLERY OR LONG HAIR CAN BE CAUGHT IN MOVING
PARTS.
• IF DEVICES ARE PROVIDED FOR THE CONNECTION OF DUST
EXTRACTION AND COLLECTION FACILITIES, ENSURE THESE ARE
CONNECTED AND PROPERLY USED. USE OF DUST COLLECTION CAN REDUCE
DUSTRELATED HAZARDS.
• DO NOT LET FAMILIARITY GAINED FROM FREQUENT USE OF TOOLS
ALLOW YOU TO BECOME COMPLACENT AND IGNORE TOOL SAFETY
PRINCIPLES. A CARELESS ACTION CAN CAUSE SEVERE INJURY WITHIN A
FRACTION OF A SECOND.
216