Exploded View - STERWINS 40VHT2-60.1 Manual Del Usuario

8.2 CLEANING THE BLADE
Illustration 5.2 and 5.4
WARNING! WEAR SAFETY GLOVES WHEN WORKING ON THE
CUTTING DEVICE AND CLOSE TO IT! USE APPROPRIATE TOOLS TO
REMOVE DEBRIS, E.G. A BRUSH OR WOODEN STICK! NEVER USE
YOUR BARE HANDS! THE REPLACEMENT OF THE CUTTING DEVICE
SHOULD BE DONE BY A QUALIFIED SPECIALIST! REWORK OR
SHARPENING BLADES IS NOT RECOMMENDED UNLESS IT IS DONE
BY A REPAIR SERVICE OR A SIMILARLY QUALIFIED SPECIALIST!
Keep the blade 2 clean and free of debris. Remove trimmings. Apply a small amount of lubricant
(resin cleaner) on the blade 2 to retain a good cutting performance. Keep the blade 2 sharp.
Have a worn or damaged cutting device replaced with a new one of the same type by a qualified
specialist.

8.3 EXPLODED VIEW

225
FR
ES
PT
IT
EL
PL
RU
KZ
UA
RO
EN