Special Safety Rules - Metabo ASE 18 Instrucciones De Manejo

17026704_0109 ASE 18 NAFTA.book Seite 6 Dienstag, 13. Januar 2009 11:54 11
ENGLISH
ENG
Remove adjusting keys or wrenches before
turning the tool on. A wrench or a key that is
left attached to a rotating part of the tool may
result in personal injury.
Do not overreach. Keep proper footing and
balance at all times. Proper footing and
balance enable better control of the tool in
unexpected situations.
Use safety equipment. Always wear eye
protection. Dust mask, non-skid safety shoes,
hart hat, or hearing protection must be used for
appropriate conditions.
Tool Use and Care
Use clamps or other practical way to secure
and support the workpiece to a stable
platform. Holding the work by hand or against
your body is unstable and may lead to loss of
control.
Do not force tool. Use the correct tool for
your application. The correct tool will do the
job better and safer at the rate for which it is
designed.
Do not use tool if switch does not turn it on
or off. A tool that cannot be controlled with the
switch is dangerous and must be repaired.
Disconnect battery pack from tool or place
the switch in the locked or off position
before making any adjustments, changing
accessories, or storing the tool. Such
preventive safety measures reduce the risk of
starting the tool accidentally.
Store idle tools out of reach of children and
other untrained persons. Tools are
dangerous in the hands of untrained users.
When battery pack is not in use, keep it
away from other metal objects like: paper
clips, coins, keys, nails, screws, or other
small metal objects that can make a
connection from one terminal to another.
Shorting the battery terminals together may
cause sparks, burns, or a fire.
Maintain tools with care. Keep cutting tools
sharp and clean. Properly maintained tools
with sharp cutting edge are less likely to bind
and are easier to control.
Check for misalignment or binding of
moving parts, breakage of parts, and any
other condition that may affect the tool's
operation. If damaged, have the tool
serviced before using. Many accidents are
caused by poorly maintained tools.
Use only accessories that are recommended
by the manufacturer for your model.
Accessories that may be suitable for one tool
may create a risk of injury when used on another
tool.
6
All manuals and user guides at all-guides.com
Service
Tool service must be performed only by
qualified repair personnel. Service or
maintenance performed by unqualified
personnel may result in a risk of injury.
When servicing a tool, use only identical
replacement parts. Follow instructions in
the Maintenance section of this manual. Use
of unauthorized parts or failure to follow
Maintenance Instructions may create a risk of
shock or injury.

3 Special Safety Rules

Hold tool by insulated gripping surfaces
when performing an operation where the
cutting tool may contact hidden wiring.
Contact with a "live" wire will make exposed
metal parts of the tool "live" and shock the
operator.
Before using this power tool, completely read and
understand the enclosed safety information and
the instructions. Keep all enclosed documentation
for future reference, and pass on your power tool
only together with this documentation.
For your own protection and for the
protection of your power tool pay
attention to all parts of the text that are
marked with this symbol!
Protect battery packs from water and
moisture!
Never use faulty or deformed battery packs!
Do not expose battery packs to naked
flame!
Do not open battery packs!
Do not touch or short-circuit battery packs!
Remove the battery pack from the machine
before any adjustment or maintenance is carried
out.
Before fitting the battery pack, make sure that
the machine is switched off.
Caustic fluid may leak from defective
NiCd or NiMH battery packs
(30% caustic potash solution)!
Slightly acidic, flammable fluid may leak
from defective Li-Ion battery packs!
If battery fluid from NiCd, NiMH or Li-Ion
battery packs leaks out and comes into
contact with the skin, rinse the affected area
thoroughly with water. If battery fluid leaks out