Installation; Operation - Sondpex RUSX112 Manual De Usuario E Instalacion

1. INSTALLATION

Precautions
· Choose the mounting location carefully so that the unit will not
interfere with the normal driving functions of the driver.
· Avoid installing the unit where it would be subject to high
temperatures, such as from direct sunlight or hot air from the heater,
or where, it would be subject to dust, dirt or excessive vibration.
· Use only the supplied mounting hardware for a safe and secure
installation.
· If installation angle exceeds 30° from horizontal, the unit might
not give its optimum performance.
Trim Plate Installation

2. OPERATION

· Before attaching the trim plate, the side with a "Bottom" Label
should be at down side (as shown on diagram).
· Push the trim plate against the main panel until it is fitted.
Unit Removal
· Insert the supplied key into the slot as shown, and slide the unit out
of the dashboard while holding the trim plate.
· Remove the key from the slot.
· Disconnect all the wires of the unit and the antenna plug.
Page 4 Page 5