Bluetooth Operations; Call Transfer - NORAUTO NS-202 ВТ Manual Del Usuario

All manuals and user guides at all-guides.com

BLUETOOTH OPERATIONS

Note:
For your safety, avoid talking on the phone as
much as possible while driving.
Bluetooth is a wireless transmission way
for short distance. The built-in Bluetooth
can connect with the mobile phones having
Bluetooth function.
After connecting, you can control your mobile
phone through the unit.
Pairing
Use this function to establish a connection
between the unit and your mobile phone.
1. Turn on the unit.
2. Turn on Bluetooth function of your mobile
phone, keep phone within 3 meters to
the unit and start to search for Bluetooth
devices.
3. After the name of the Bluetooth module
"NS-202 BT" appears on the pairing list of
your mobile phone, select it. At this time, a
pairing code is required. Enter the pairing
code "0000", and the Bluetooth pairing
will process automatically. Some mobile
phones may instruct you to select connect
or disconnect, please select connecting.
Receive
1. After pair successfully, if there is a call
incoming, the unit switch to BT mode
automatically.
2. Press [5/ ] button to receive.
3. Press [6/ ] button to hang up.

Call Transfer

During talking, press [5/
audio from the unit to your mobile phone.
Note:
Some mobile phones will transfer audio from
the unit to themselves once the incoming call
is answered.
BT Audio
To listen to audio from a bluetooth device and
control playback with the unit.
1. Press SRC button repeatedly to select A2DP
mode.
2. To play or pause, press [1 >|| TOP].
Selecting a track
Track-up
Press the [
beginning of the next track.
Track-down
Press the [
beginning of the previous track.
Music Mode
A2DP
A2DP is short for Advanced Audio Distribution
Profile. The mobile phones supporting this
function can transmit stereo audio, whereas
the ones not supporting this function can
transmit mono audio only.
General Notes for Bluetooth
1. For some types of mobile phones, during
our test, after the mobile phones appear
connection successful, the unit still appear
waiting for pairing. At this time you must find
the unit's Bluetooth module name "NS-202
BT" on the pairing list on your mobile phone
and select connecting in the submenu, then
the unit will appear CONNECT. Otherwise,
t h e r e i s n o v o i c e c o m i n g o u t w h e n
communicating, though the mobile phone
has already displayed CONNECT. Some
mobile phones, when it play back A2DP, you
must find the unit name in the phone's menu
and reconnect (check your mobile phone
whether has the A2DP & AVRCP functions).
2. When pairing, some types of mobile phone
hint that how to operate, for example, when
you make a phone call by the unit, if the
mobile phone voice dosn't be transferred to
] button to transfer
the unit, no voice comes out.
3. Depending on the mobile phone, if private
mode is selected, when you make a phone
call by the unit, or receive, the voice would
be transferred to the mobile phone. But
sometime the Bluetooth maybe disconnect
till the communication ends, then connects
your mobile phone to the unit automtically.
Some mobile phones maybe need pair
again.
4. For mobile phone, the Bluetooth device
name must be primary symbols or numbers.
Otherwise, some unpredictable issues
may occur during the Bluetooth devices
95
] button to move to the
] button to move to the