Taurus Inedit Lithium 29.6 Manual Del Usuario página 12

- To use the hand vacuum:
- Press the hand vacuum extraction button (H) on
the brush vacuum's main body (E). (Fig. 2)
- Turn the appliance on, by using the on/off
switch. (I)
FITTING AN ACCESSORY TO THE HAND
VACUUM:
- Press the hand vacuum extraction button (H) on
the brush vacuum's main body (E). (Fig. 2)
- The hand vacuum is designed in such a way
that it allows the following accessories to be
fitted: (use the combination that best meets your
requirements). (Fig.3)
- Furniture brush: Equipped with a brush at the
end, which brushes the surface as it is used.
- Crevice nozzle: Specially designed for getting
into cracks and difficult corners.
PARKING POSITION:
- This appliance has one parking position for
comfortable and straightforward storage.
FOLDING HANDLE:
- This appliance has a folded handle position for
easy storage. (Fig.4)
CLEANING
- Disconnect the charger from the mains and let it
cool before undertaking any cleaning task.
- Clean the appliance using a damp cloth with a
few drops of detergent and then dry it.
- Do not use solvents, or products with an acid or
base pH such as bleach, or abrasive products,
for cleaning the appliance.
- Do not submerge the appliance in water or any
other liquid, or place it under a running tap.
EMPTYING THE DUST BOX:
- Empty the vacuum deposit when dust is visible
though the transparent walls, when it is full, or
when the vacuum cleaner does not work to its
full potential.
- Press the hand vacuum extraction button (H) on
the brush vacuum's main body (E). (Fig. 2)
Disconnect the dust box from the appliance. (Fig.
5)
- Remove the cloth filter and its protector. (Fig. 6)
- Empty the contents into a suitable rubbish
container.
- Clean the dust box filter.
- Attach the dust box to the appliance.
To reassemble, follow the above instructions but
in reverse.
CHANGING THE FILTERS:
- To remove filters:
- Press the hand vacuum extraction button (H) on
the brush vacuum's main body (E). (Fig. 2)
- Disconnect the dust box from the appliance.
(Fig 5)
- Remove the cloth filter and its protector. (Fig. 6)
- To reassemble the filter, proceed with the above
instructions, in reverse order.
CLEANING THE ROTARY BRUSH:
- Remove the transparent cover from the top of
the motorized brush. (Fig. 7)
- Lift the brush by the piece at the end of the
brush.
- To mount, insert the brush into the anchor, align
the cover with the tabs on the front and press
until you hear the click.
SUPPLIES
- Supplies can be acquired from distributors and
authorised establishments (such as filters, etc. )
for your appliance model.
- Always use original supplies, designed specifi-
cally for your appliance model.
ANOMALIES AND REPAIR
Take the appliance to an authorised technical
support service if problems arise. Do not try to
dismantle or repair without assistance, as this
may be dangerous.
FOR EU PRODUCT VERSIONS AND/OR IN
THE CASE THAT IT IS REQUESTED IN YOUR
COUNTRY:
ECOLOGY AND RECYCLABILITY OF THE
PRODUCT
The materials of which the packaging of this
appliance consists are included in a collection,
classification and recycling system. Should you
wish to dispose of them, use the appropriate
public containers for each type of material.
- The product does not contain concentrations of
substances that could be considered harmful to
the environment.
This symbol means that in case you wish
to dispose of the product once its working
life has ended, take it to an authorised
waste agent for the selective collection of
waste electrical and electronic equipment
(WEEE)