Check Point 15000 Serie Guía De Introducción página 31

To monitor the RAID status of the disks from the CLI:
1. Log in to the appliance.
2. Use one of these tools to monitor the RAID status of the hard disks:
• Run raid_diagnostic
This shows data about the RAID and hard disks, with the percent
synchronization done.
DiskID 0 is the top hard disk. DiskID 1 is the bottom hard disk.
For example:
Server123> raid_diagnostic
Raid status:
VolumeID:0 RaidLevel: RAID-1 NumberOfDisks:2 RaidSize:931GB
State:OPTIMAL Flags:ENABLED
DiskID:0 DiskNumber:0 Vendor:ATA
WD1003FBYZ-0 Revision:01.0 Size:931GB State:ONLINE
Flags:NONE
DiskID:1 DiskNumber:1 Vendor:ATA
WD1003FBYZ-0 Revision:01.0 Size:931GB State:ONLINE
Flags:NONE
Run cpstat os –f raidInfo
•
This shows almost the same information as the raid_diagnostic command
in tabular format.
To monitor the RAID status of the disks from the WebUI:
1. Log in to the WebUI.
2. Select Maintenance > RAID Monitoring.
Check Point 15000 and 23000 Appliances Getting Started Guide
Configuring 15000 / 23000 Appliances
ProductID:WDC
ProductID:WDC
| 31