Lights Out Management - Check Point 15000 Serie Guía De Introducción

Item Component
1 Cover screws
2 Alarm Off button for
power supply units
3 ESD grounding plug When servicing the appliance, connect an ESD strap to
4 Power supply units
5 LED indicator for
each power supply
unit
6 DC grounding lugs
7 Main power switch
8 Thumb screws for
cooling fan unit
9 Cooling fan units

Lights Out Management

The Check Point Lights Out Management (LOM) card lets you use a dedicated
management channel to remotely control Check Point appliances. Lights Out
Management can also work when the appliance is turned off or not responding. But
the appliance, must be connected to a power source.
For more about using Lights Out Management, see the
Administration Guide
Description
Loosen screws to remove the cover of the appliance.
If a power supply cable is not connected to the outlet, an
alarm sounds continuously. Press this button to turn off
the alarm. Note that this button is functional 1-2
minutes after powering up the appliance.
this plug.
Dual redundant power supplies that you can hot swap.
Each power supply unit connects to an electric outlet.
•
Off - Power supply is not connected to an electric
outlet
• On (Amber) - Power off
• On (Green) - Power on
Used to connect grounding (for DC power supply
systems).
Loosen screws to remove cooling fan unit from the
appliance.
Numbered from right to left: 1, 2, 3, 4.
.
Check Point 15000 and 23000 Appliances Getting Started Guide
15000 / 23000 Appliances Hardware

Lights Out Management

| 43