König Electronic KN-MICW330 Manual página 7

All manuals and user guides at all-guides.com
3.
4.
Auto scan mode:
1.
2.
3.
Preset Mode
Setting channel by using a preset group
There are 4 preset groups, in each group are 8 pre-programmed channels. Using a preset
group, users can easily set up an 8 receiver-microphone system according to the default
channels of a preset group. Excluding the interference from the outside environment, the
default channels are interference-free from each other. Users do not need to worry about
how to scan 8 channels for a multi-receiver system. User can use a preset group to set
up in few steps.
1.
2.
Press "SET" for 2 seconds, until "MUTE" shows up;
release the button, the LCD display will flash.
Press  or  to change the channel forward or
backward.
Stop pressing  or  and let the LCD display flash five
times to lock the setting.
Press and hold down the button  or , until "SCAN"
mode is selected.
Press "SET" for 2 seconds, until "MUTE" shows up;
release the button, LCD display will flash.
Press  or  to scan in forward or backward direction,
and it will stop at an interference free channel
automatically.
Stop pressing the button and let the LCD display flash
five times to lock the setting.
Press and hold down  or , until the display moves
to "PRESET" mode.
Press "SET" for 2 seconds, until "MUTE" shows up;
release the button, the LCD display will flash.
Press the channel button
programmable group forward.
Press  to change the programmable 8 channel group
backward
7
 to change the