König Electronic KN-MICW330 Manual página 9

All manuals and user guides at all-guides.com
Setting up the receiver and bodypack transmitter
A. Connecting a microphone
1. Push the MIC/LINE switch to "MIC" and use the supplied screw- driver to set the GAIN
to the appropriate position.
2. Plug the mini XLR connector of the microphone cable into the audio input connector on
the bodypack transmitter.
3. Switch the transmitter and amplifier/audio mixer on.
4. Adjust the channel settings of the transmitter according to the receiver's channel
settings.
5. Test the microphone and adjust the levels on your audio mixer or amplifier.
B. Connecting an instrument
1. Push the MIC/LINE switch to "LINE" and use the supplied screwdriver to adjust the
GAIN to the appropriate position.
2. Plug the 6.35mm plug of the optional guitar cable to the output jack on the instrument
and the mini XLR into the audio input connection on the bodypack transmitter.
3. Switch the transmitter and Hi-Fi device (amplifier, tape deck etc.) on.
4. Adjust the channel settings of the transmitter according to the receiver's channel
settings.
5. Play the instrument for testing and adjust the levels on your audio mixer or amplifier.
Rack mounting:
To combine two receivers in a 19" standard rack, use 2 short L type plastics racks (L2)
and 2 metal connecting plates (C1). Each system includes a L2 and a C1.
C 1
L 2
9