Alcedo JPD-FR300 Manual Del Usuario página 25

The "
4. Point the thermometer probe to the center of the object, about
" 1-3cm" away from the object surface.
5. Press and release the Measure button for 1 second. The
temperature reading will be displayed on the screen instantly.
6. If no activity is detected, the thermometer will power off
automatically in 12 seconds.
After a measurement
(1) After each measurement, you can enter the recall mode and query
earlier temperature readings. For more details, see "Recall 20
memories" in the preceding table.
(2) After each measurement, clean the temperature probe with a soft cloth,
and put the thermometer in a dry and well-ventilated place.
It is dangerous to make a self-diagnosis or self-treatment based on the
obtained measurement results. For such purposes, please consult a doctor.
Notes:
(1) The thermometer is suitable for an indoor environment without strong
air convection (for example, winds from a fan, an air-conditioner, or a
heater) between the thermometer and the person.
" symbol is displayed on the screen.
21
EN